Page 96 - Glow Insulation Product Guide

ACOUSTICS
Acoustic Batten JCW 80T TIMBER FLOOR BATTEN
01
02
03
18mm t&g chipboard @ 400mm centres or 22 t&g chipboard at 600mm centres
19mm Plasterboard Plank 15mm OSB Board
E-FT-1, E-FT-2, E-FT-3 & E-FS-2
Wool Fibre between the battens of: either 13mm (min) 33-36 kg/m3 or 25mm (min) 10-36 kg/m3
Mineral Wool Fibre between the battens of 60mm (min) 10-36 kg/m3
JCW L Shaped or Flat Perimeter Edging Strip detail
Resilient Bars and 2 layers
x 15mm Acoustic Plasterboard
JCW 80T Acoustic Batten
04
04
01
04
03
02
06
07
05 06 07
05
FFT-1 Resilient Composite Deep Batten System
Timber batten laminated to a 9mm acoustic resilient layer
Robust Detail (Registered Sites)
•
that meets the Robust Detail requirements. Pre-completion testing is not required
• Acoustic Batten JCW 80T = FFT-1 Floating Floor types: E-FT-1,2,3 & E-FS-2 (Refer to Robust Details Handbook for
PCT/PT & Refurbishment
•
• It is essential all components are correctly installed and detailed to meet the requirements where Pre-completion Sound Testing is required
Size: 80mm x 42mm x 1800mm Weight: 1.9 kgs (JCW 80T) - Other batten sizes are available on request
Robust Detail Performance: Reduction in Impact Sound transmission; rd ∆ Lw = 16 dB Improvement in Airborne Sound insulation; rd Rw + Ctr = 13 dB
Tests were carried out by Sound Research Laboratories, UKAS accredited test laboratory No. 0444 on the 7th October 2013. Test Report No. C/22610/T01
Method of Compliance
Robust Detail, PCT/PT (Scotland)
Ancillary Products
JCW Flat Edging Strip (50 Lm x 150mm x 5mm) JCW Universal L Shaped Strip (2 Lm x 53mm x 23mm) JCW Waterproof PVA Adhesive (1 Litre)
JCW Acoustic Sealant (310ml)
JCW Fire & Acoustic Sealant (310ml)
96
www.glowinsulation.co.uk